4. Control panel
See “Control Panel”.
5. Duplex unit (Unit for two-sided copies/prints)
Makes two-sided copies/prints.
6. Front cover
Open to access the inside of the machine.
7. Paper trays
Load paper here. See “Loading Paper”, Troubleshooting.
8. Lower paper trays (optional)
Load paper here. See “Options”, and “Loading Paper”, Troubleshooting.
9. Main power switch
If the machine does not operate after turning on the operation switch, check if the main power switch is turned
on. If it is off, turn it on.
See “Turning On/Off the Power”.
10. Ventilation holes
Prevent overheating.
11. Internal tray
Copied/printed paper and fax messages are delivered here.
1. Bypass tray
Use to copy or print onto OHP transparencies, adhesive labels, translucent paper, envelopes, and custom size
paper.
2. Lower right cover (optional)
Open this cover to remove jammed paper from the optional lower paper trays. See “Options”.
1. Getting Started
26
To Next Page
Loading...
Need help?
General