2. Press [Original Size].
3. Press [Regular Size].
4. Select the size of original, and then press [OK] twice.
5. Place the originals, and then press the [Start] key.
Custom sizes
When placing custom size originals in the ADF, specify the size of the originals.
• Paper that has a vertical length of 105 - 297 mm (4.2 -11.6 inches) and a horizontal length of 128
- 1260 mm (5.1 - 49.6 inches) can be placed with this function. If the ADF is not installed, the maximum
length in horizontal direction is 432 mm (17 inches).
1. Press [Special Original].
2. Press [Original Size].
3. Press [Custom Size].
1. Placing Originals
30
To Next Page
Loading...
Need help?
General