When the 3000-sheet finisher is installed:
3. Press [OK].
4. Enter the number of copy sets using the number keys.
5. Place the originals.
To confirm the type of finishing, press the [Sample Copy] key.
6. Press the [Start] key.
• When placing an original on the exposure glass, start with the first page to be copied. When placing
originals in the ADF, set so the first page is on the top.
• When placing originals on the exposure glass, or in the ADF using Batch mode, press the [ ] key
after all the originals have been scanned.
• You can change the settings for Sort under Input/Output in User Tools. For details, see “Copier/
Document Server Features”, General Settings Guide.
• For details about standard paper sizes that can be used with Rotate Sort, and the number of sheets
that can be stacked on each tray, see “Supplementary Information”.
• p.171 "Supplementary Information"
2. Basic Copying
62
To Next Page
Loading...
Need help?
General