1. Press [Dup./Combine/Series].
2. Press [Book].
3. Select a book type separately for the original ([1 Sided] or [2 Sided]) and copy ([Booklet]
or [Magazine]), or select a book type from [Book 2 Sided] and [Front&Back 2 Sided].
If you specified [2 Sided] for the original, [Book 2 sided], or [Front&Back 2 sided], you can
specify the orientation of originals or copies.
4. Select the paper size.
5. Press [OK].
• When placing originals on the exposure glass, or in the ADF using Batch mode, press the [ ] key
after all the originals have been scanned.
• The machine sets the reproduction ratio automatically to meet the paper size.
• The default setting for the orientation of Booklet and Magazine is [Open to Left]. You can change the
default under Orientation: Booklet, Magazine in User Tools. For details, see “Copier/Document
Server Features”, General Settings Guide.
• p.51 "Originals and copy orientation"
3. Advanced Copying
136
To Next Page
Loading...
Need help?
General