Item Description
Erase Original Shadow in
Combine
In Combine mode, you can specify whether to erase a 3 mm, 0.1 inch
boundary margin around all four edges of each original.
Erase Center Width Specify the width of the erased center margins with this function.
Front Cover Copy in
Combine
You can make a combined copy on the front cover sheet when you
select Front Cover mode.
Copy Order in Combine You can set the copy order in Combine mode to Left to Right or Top to
Bottom.
Orientation: Booklet,
Magazine
You can select the opening orientation of copies when using Booklet
or Magazine mode.
Copy on Designating
Page in Combine
Specify whether to make a combined copy on the inserted slip sheets
in Desig./Chapter mode.
Image Repeat Separation
Line
You can select a separation line using the Image Repeat function from:
None, Solid, Broken A, Broken B, or Crop Marks.
Double Copies
Separation Line
You can select a separation line using the Double Copies function from:
None, Solid, Broken A, Broken B, or Crop Marks.
Separation Line in
Combine
You can select a separation line using the Combine function from:
None, Solid, Broken A, Broken B, or Crop Marks.
Stamp
Item Description
Background Numbering
Size You can set the size of the numbers.
Density You can set the density of the numbers.
Preset Stamp
Stamp Language You can select the language of the message printed in Stamp mode.
Stamp Priority You can select the stamp type given priority when [Preset Stamp] is
pressed.
Stamp Format Specify how each of stamps is printed.
User Stamp
5. Appendix
184
To Next Page
Loading...
