To change the e-mail address after pressing [OK], press [Edit Dest.], re-enter an e-mail address, and
then press [OK].
5. To add a destination, press [Add].
6. Specify the next destination.
To add another destination, repeat steps 5 and 6.
Press the transmission type tab to switch the transmission type between fax/IP-Fax, Internet Fax, e-
mail, and folder.
7. Press the [Start] key.
The machine starts to scan the original and stores it in memory. When scanning ends, the
Communicating indicator lights and transmission starts.
• Depending on the security settings, [Manual Entry] might not appear and you might not be able to
enter the e-mail address.
• To select a destination from the Address Book, see “Using the Address Book to Specify Destinations”.
• For details about text entry, see “Entering Text”, About This Machine.
• For details about canceling a transmission, see “Canceling a Transmission”.
• The Facsimile Features menu includes a user parameter setting (switch 17, bit 2) that enables you to
configure the machine to force the user to press [Add] whenever s/he specifies a destination using a
destination key. This prevents users accidentally sending documents to the wrong destination. See
“Facsimile Features”, General Settings Guide.
Specifying a Destination
87
To Next Page
Loading...
