1. Press [SMTP].
2. Press [No].
3. Press [OK].
• If you use [Manual Entry] to specify the destinations directly, you can also specify whether or not to
use SMTP server for each destination.
• If you use the destination list to select the destinations, the SMTP server setting specified in the Address
Book is enabled. For details about making the SMTP server settings in the Address Book, see
“Registering Addresses and Users for Facsimile/Scanner Functions”, General Settings Guide.
• To send Internet Fax documents from a computer, use the LAN-Fax Driver to specify whether or not
to bypass the SMTP server. When sending with the [Use device address] check box selected, the
SMTP server setting specified on this machine is enabled.
1. Transmission
90
To Next Page
Loading...
