2. Press [TX Mode].
3. Select [Option Setting].
4. Press [SUB Code Transmission] to highlight it.
To cancel a SUB Code Transmission, press [SUB Code Transmission] again.
5. Press [OK] twice.
6. Specify the destination, and then press the [Start] key.
• For details about specifying SUB Codes, see the following:
• To specify SUB Codes in “Adv.Features”, see “Setting SUB Codes for Transmission”.
• To register SUB Codes in the Address Book, see “Registering Addresses and Users for Facsimile/
Scanner Functions”, General Settings Guide.
• To register SUB Codes in Keystroke Programs, see “Registering and Changing Keystroke
Programs”.
• You can program one of the Quick Operation keys with operations for this function. Using the Quick
Operation key allows you to omit steps 2, 3, and 5. For details about Quick Operation Key, see
“Facsimile Features”, General Settings Guide.
• p.134 "Setting SUB Codes for Transmission"
• p.304 "Registering and Changing Keystroke Programs"
2. Other Transmission Features
174
To Next Page
Loading...
Need help?
General