• Contact name as sender information
• Telephone number as sender information
• Fax number as sender information
• Date
• Message
1. On the [Start] menu, point to [All Programs], [LAN-Fax Utilities], and then click [LAN-Fax
Cover Sheet Editor].
The [LAN-Fax Cover Sheet Editor] dialog box appears.
2. Edit the cover sheet.
For details about operations, see Help.
3. Click [Save as...] on the [File] menu.
4. Select a folder, and then enter a file name.
5. Click [Save].
• Cover sheet data is stored in its own format (using “fcp” as its extension).
Attaching a created cover sheet
This section explains how to attach a created cover sheet file to a fax document.
1. On the [File] menu, click [Print...].
2. Select [LAN-Fax M8] in the list, and then click [Print].
The [LAN-Fax] dialog box appears.
3. Click [Edit Cover Sheet...].
The [Cover Sheet] dialog box appears.
4. Select a cover sheet file from the dropdown list or after clicking [Browse...] in [Select Cover
Sheet].
The selection made in [Select Cover Sheet] is not canceled unless you select another file. If you want
to change only destination information, omit this step and proceed to step 5.
5. Select the type of information from [To:].
You can select [Use Address Book], [To Whom It May Concern], [Edit Names], or [(None)]. Selecting
[Edit Names] allows you to enter company, department, and contact names.
6. To print the date, select the [With a Date] check box.
7. Enter the sender information.
You can enter company, department, and contact names, and telephone and fax numbers.
Sending Fax Documents from Computers
295
To Next Page
Loading...
Need help?
General