IP-Fax Transmission and Reception
Component Specifications
Network Ethernet (1000BASE-T, 100BASE-TX, 10BASE-T)
Wireless LAN (Based on IEEE 802.11a/b/g)
Scan line density 8 × 3.85 lines/mm, 200 × 100 dpi (Standard character),
8 × 7.7 lines/mm, 200 × 200 dpi (Detail character),
8 × 15.4 lines/mm (Fine character: optional),
16 × 15.4 lines/mm, 400 × 400 dpi (Super Fine character: optional)
Maximum original size Standard: A3 , 11 × 17
Custom: 297 × 1200 mm, 11 × 47 inches
Maximum scanning size 297 mm × 1200 mm, 11 × 47 inches
Transmission protocol Recommendation: T.38, TCP, UDP/IP communication, SIP (RFC
3261 compliant), H.323 v2
Compatible machines IP-Fax compatible machines
IP-Fax transmission function Specify an IP address and send faxes to an IP-Fax compatible fax
through a network.
Also capable of sending faxes to a G3 fax connected to a telephone
line via a VoIP gateway.
IP-Fax reception function Receive faxes sent from an IP-Fax compatible fax through a network.
Also capable of receiving faxes from a G3 fax connected to a
telephone line via a VoIP gateway.
Internet Fax Transmission and Reception
Component Specifications
Network Ethernet (1000BASE-T, 100BASE-TX, 10BASE-T)
Wireless LAN (Based on IEEE 802.11a/b/g)
Transmit function E-mail
Scan line density 200 × 100 dpi (Standard character), 200 × 200 dpi (Detail
character), 200 × 400 dpi (Fine character: optional)
*1
, 400 × 400
dpi (Super Fine character: optional)
*1
Original size : Scanning width A3
*1
, B4 JIS
*1
, A4
7. Appendix
312
To Next Page
Loading...
