• You can designate up to 100 locations using the printer driver.
• The slip sheet should be the same size and orientation as the body paper.
• If "Auto Tray Select" has been set as the paper feed tray for the body paper, the paper will be delivered
from a tray containing paper in the orientation. Therefore, when the slip sheet has been set to the
orientation, the orientation of the output slip sheet and body will be different.
• The same paper feed tray cannot be set for the body of the document and the slip sheet.
• For details about printing methods, see the printer driver Help.
Chaptering
125
To Next Page
Loading...
