Rohde & Schwarz RTP044 - Page 1698

Remote control commands
R&S
®
RTP
1698User Manual 1337.9952.02 ─ 12
Parameters:
<TypeSpecifier> CSTatus | DATA | ALL
CSTatus: command/status word
*RST: ALL
22.17.8.3 Decode results
To load and acivate a label list, use:
●
BUS<m>:NEWList on page 1550
●
BUS<m>:SYMBols on page 1550
BUS<m>:MILStd:WCOunt?...........................................................................................1698
BUS<m>:MILStd:WORD<n>:DATA?.............................................................................. 1698
BUS<m>:MILStd:WORD<n>:INFO?...............................................................................1699
BUS<m>:MILStd:WORD<n>:RTADdress?......................................................................1699
BUS<m>:MILStd:WORD<n>:STARt?............................................................................. 1699
BUS<m>:MILStd:WORD<n>:STATus?........................................................................... 1700
BUS<m>:MILStd:WORD<n>:STOP?..............................................................................1700
BUS<m>:MILStd:WORD<n>:SYMBol?...........................................................................1700
BUS<m>:MILStd:WORD<n>:TYPE?..............................................................................1701
BUS<m>:MILStd:WCOunt?
Returns the number of decoded words.
Suffix:
<m>
.
1..4
Return values:
<FrameCount> Range: 0 to 100000
Increment: 1
*RST: 0
Usage: Query only
BUS<m>:MILStd:WORD<n>:DATA?
Return the data bytes of the specified word.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the word.
Return values:
<Data> 16-bit data of the specified word as a 2-byte bit pattern (B1, B2).
The first byte B1 is the most significant byte.
Example:
BUS:MILStd:WORD4:DATA?
<-- #H08,#H49
Protocols