RuggedCom RuggedBackbone RX1500

9. SNMP
ROX™ v2.2 User Guide 111 RuggedBackbone™ RX1500
Figure 9.12. SNMPv3 Target Configuration form
To display the SNMP Target Configuration form, navigate to admin/snmp/snmp-target-address/
{address}.
Target Name
A descriptive name for the target (ie. 'Corportate NMS')
enabled
Synopsis: boolean
Default: true
Enables/disables this specific target
Target Address
Synopsis: IPv4 address in dotted-decimal notation
Synopsis: IPv6 address in colon-separated hexadecimal notation
IPv4 or IPv6 address for the remote target.
Trap Port
Synopsis: unsigned short integer
Default: 162