RuggedCom RuggedBackbone RX1500 User Manual

39. Traffic Control
ROX™ v2.2 User Guide 465 RuggedBackbone™ RX1500
Figure 39.9. Advanced Traffic Control Classes table
To display this table, navigate to qos/traffic-control/advanced-configuration/tcclasses.
Figure 39.10. TC Classes form
To display this form, navigate to qos/traffic-control/advanced-configuration/tcclasses/{class}.
Note that each class is associated with exactly one network interface. Exactly one class for each
interface must be designated as the default.
name
Synopsis: string
A name for this TC class entry
interface
Synopsis: string
The interface to which this class applies... Each interface must be
listed only once.
mark
Synopsis: unsigned short integer
Mark that identifies traffic belonging to this class... This is an

RuggedCom RuggedBackbone RX1500 Specifications

General

Power Supply	Dual redundant, hot-swappable power supplies
Switching Capacity	Up to 128 Gbps
Operating Temperature Range	-40°C to +85°C
Mounting	DIN rail or panel mount
Certifications	IEEE 1613, IEC 61850-3, EN 50155, EN 50121-4
Power Input	24/48VDC or 110/220 VAC
Enclosure	Rugged metal
Type	Modular Layer 3 switch