2. System Administration
ROX™ v2.2 User Guide 58 RuggedBackbone™ RX1500
• {filename} is the name of the featurekey file.
For example:
file scp-featurekey-from-url wsmith@10.200.20.39:/files/keys/1_cmRX1K-12-11-0015.key
1_cmRX1K-12-11-0015.key
4. Type the command with your parameters and press Enter. When prompted, type the user’s
password and press Enter. The system uploads the featurekey file:
ruggedcom# file scp-featurekey-from-url wsmith@10.200.20.39:/files/keys/
1_cmRX1K-12-11-0015.key 1_cmRX1K-12-11-0015.key
wsmith@10.200.20.39's password:
1_cmRX1K-12-11-0015.key 100% 192 0.2KB/s 00:00
ruggedcom#
5. To view the contents of the featurekey file, type the following command:
file show-featurekey {filename}
Where:
• {filename} is the name of the featurekey file.
For example:
file show-featurekey 1_cmRX1K-12-11-0015.key
6. Type the command with your featurekey filename and press Enter. The system displays the
contents of the featurekey file:
ruggedcom# file show-featurekey 1_cmRX1K-12-11-0015.key
GPG_FEATUREKEY_LEVEL=1
GPG_FEATUREKEY_CM_SERIALNUMBER=RX1K-12-11-0015
GPG_FEATUREKEY_SIGNATURE=iEYEABECAAYFAk091pAACgkQP2pya+G5kdZeKACeKdHUB2G1T73Dymq8IjSdYDKAiskAn
3abBpCEhfLXxY2ZlVbvGNwDZow2
ruggedcom#
7.
On the CLI screen, click Stop to close the CLI session.
2.8.6. Backing Up a Featurekey Using the Web User Interface
Featurekey files can be backed up using the following forms. These forms are accessible from the
admin menu.
To back up a featurekey file, navigate to admin/backup-files. The Backup Files form appears. In the
File type field, select featurekey. Enter additional parameters on the form. On the Backup Files From
Devices form, click the Perform button.
To Next Page
Loading...
Need help?
General
