21. Modem
ROX™ v2.2 User Guide 208 RuggedBackbone™ RX1500
password
Synopsis: string
Default: N/A
The password to be authenticated by the remote server
dial-on-demand
Activates Dial-on-Demand on this connection. The establishment of the PPP connection is
postponed until there is data to be transmitted via the interface
disconnect-idle-timeout
Synopsis: integer
Default:
The time in seconds to wait before disconnecting PPP when there is no traffic on the link. This
option is only valid when Dial-on-Demand is enabled
failover-on-demand
Activate link failover on-demand on this device. PPP link establishment on this device is controlled
by link failover
21.1.2.4. CDMA
The CDMA GSM profile is selected by using the CDMA EVDO Cellular Modem Configuration form
but the profile needs to be configured first from the Global Cellular CDMA Modem menu. See
Section 21.1.2.4.2, “Global Cellular CDMA Modem Configuration” for information on configuration. After
the profile has been configured, the CDMA functions and the CDMA EVDO modem Configuration form
are accessible from the CDMA menu.
The path to the CDMA menu is interfaces/cellmodem/{line module}/cdma. The CDMA EVDO Cellular
Modem Information form appears on the same screen as the CDMA menu.
Figure 21.7. CDMA EVDO Cellular Modem Information form
network-supported
Synopsis: A string
Wireless technologies supported by the modem
To Next Page
Loading...
Need help?
General
