EasyManuals Logo

RuggedCom RuggedBackbone RX1500 User Manual

RuggedCom RuggedBackbone RX1500
507 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #150 background imageLoading...
Page #150 background image
15. DHCP Server
ROX™ v2.2 User Guide 150 RuggedBackbone™ RX1500
unknown-client
Synopsis: string - one of the following keywords { ignore, deny, allow }
Default: allow
The action to take for previously unregistered clients
shared-network
Synopsis: A string
Shared-network that this host group belongs to
subnet
Synopsis: A string
The subnet that this host group belongs to
15.2.8.3. Client Configuration Options at the DHCP Client Level
The following DHCP client, NIS, and NetBios options are set at the client level under all DHCP levels.
To set the client configuration options, enter edit mode and navigate to:
DHCP server options: /services/dhcpserver/options/client
subnet options: /services/dhcpserver/subnet{subnet id}/options/client
shared network options: /services/dhcpserver/shared-network{shared network id}/options/client
host-group options: /services/dhcpserver/host-groups{host-group id}/options/client
host options: /services/dhcpserver/host{host id}/options/client
Client Configuration:
Figure 15.15. Client Configuration form for DHCP Clients
hostname
Synopsis: A string
The unique name to refer to the host within a DHCP configuration
subnetmask
Synopsis: IPv4 address in dotted-decimal notation
Subnet mask
default-route
Synopsis: IPv4 address in dotted-decimal notation

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RuggedCom RuggedBackbone RX1500 and is the answer not in the manual?

RuggedCom RuggedBackbone RX1500 Specifications

General IconGeneral
Power SupplyDual redundant, hot-swappable power supplies
Switching CapacityUp to 128 Gbps
Operating Temperature Range-40°C to +85°C
MountingDIN rail or panel mount
CertificationsIEEE 1613, IEC 61850-3, EN 50155, EN 50121-4
Power Input24/48VDC or 110/220 VAC
EnclosureRugged metal
TypeModular Layer 3 switch

Related product manuals