RuggedCom RuggedBackbone RX1500

32. Layer 3 Switching
ROX™ v2.2 User Guide 368 RuggedBackbone™ RX1500
32.2.5. Flushing Dynamic Hardware Routing Rules
Flushing dynamic hardware routing rules removed dynamic rules from the Routing Rules Summary
table.
You can only flush dynamic rules. Static rules, enabled by activating hardware acceleration,
never age out. For more information on how to enable hardware acceleration, see
Section 32.1, “Layer 3 Switching Fundamentals” .
To flush dynamic hardware routing rules:
• Navigate to switch/layer3-switching and click flush-dynamic-rules.
• On the Flush Dynamic Hardware Routing Rules form, click Perform.
Figure 32.12. Flush Dynamic Hardware Routing Rules form