RuggedCom RuggedBackbone RX1500 User Manual

33. Tunnelling
ROX™ v2.2 User Guide 372 RuggedBackbone™ RX1500
33.1.2. IPsec Configuration
Figure 33.2. IPsec menu
The IPsec menu is accessible from the main menu under tunnel. The path to this menu is tunnel/ipsec.
The IPsec form appears on the same screen as the IPsec menu.
Figure 33.3. IPsec form
The IPsec form is used in configuring IPSec VPN.
Enable IPSec
Enables IPSec.
NAT Traversal
Enables NAT Traversal.
Keep Alive
Synopsis: unsigned integer
The delay (in seconds) for sending keepalive packets to prevent NAT router from closing its port
when there is not enough traffic on the IPsec connection.
Figure 33.4. Syslog form
The path to the Syslog form is tunnel/ipsec.

RuggedCom RuggedBackbone RX1500 Specifications

General

Power Supply	Dual redundant, hot-swappable power supplies
Switching Capacity	Up to 128 Gbps
Operating Temperature Range	-40°C to +85°C
Mounting	DIN rail or panel mount
Certifications	IEEE 1613, IEC 61850-3, EN 50155, EN 50121-4
Power Input	24/48VDC or 110/220 VAC
Enclosure	Rugged metal
Type	Modular Layer 3 switch