RuggedCom RuggedBackbone RX1500 User Manual

33. Tunnelling
ROX™ v2.2 User Guide 390 RuggedBackbone™ RX1500
Figure 33.39. Connections Statistics table
remote-ip
Synopsis: IPv4 address in dotted-decimal notation
IP address of remote goose daemon
rx-packets
Synopsis: unsigned integer
The number of frames received over the tunnel
tx-packets
Synopsis: unsigned integer
The number of frames transmitted over the tunnel
rx-bytes
Synopsis: unsigned integer
The number of bytes received over the tunnel
tx-bytes
Synopsis: unsigned integer
The number of bytes transmitted over the tunnel
errors
Synopsis: unsigned integer
The number of errors over the tunnel
Figure 33.40. Connections Statistics form
33.3.3.3.2. Status Generic
The forms and tables in this section are located under tunnel/l2tunneld/status/generic.

RuggedCom RuggedBackbone RX1500 Specifications

General

Power Supply	Dual redundant, hot-swappable power supplies
Switching Capacity	Up to 128 Gbps
Operating Temperature Range	-40°C to +85°C
Mounting	DIN rail or panel mount
Certifications	IEEE 1613, IEC 61850-3, EN 50155, EN 50121-4
Power Input	24/48VDC or 110/220 VAC
Enclosure	Rugged metal
Type	Modular Layer 3 switch