RuggedCom RuggedBackbone RX1500 User Manual

3. Time Synchronization
ROX™ v2.2 User Guide 71 RuggedBackbone™ RX1500
Enable Broadcast Client
The broadcast address on which the NTP client listens for NTP messages.
3.2.10. Checking NTP Status
To view the NTP service status:
• In normal or edit mode, navigate to /services/time/ntp/ntp-status and click <ntp-status>.
• On the Trigger Action form, click Perform.
• Review the NTP service status in the NTP Service Status form.
Figure 3.12. NTP Service Status form
For more information on viewing NTP status information, refer to http://support.ntp.org/bin/view/Support/
TroubleshootingNTP

RuggedCom RuggedBackbone RX1500 Specifications

General

Power Supply	Dual redundant, hot-swappable power supplies
Switching Capacity	Up to 128 Gbps
Operating Temperature Range	-40°C to +85°C
Mounting	DIN rail or panel mount
Certifications	IEEE 1613, IEC 61850-3, EN 50155, EN 50121-4
Power Input	24/48VDC or 110/220 VAC
Enclosure	Rugged metal
Type	Modular Layer 3 switch