RuggedCom RuggedBackbone RX1500 User Manual

11. NETCONF
ROX™ v2.2 User Guide 121 RuggedBackbone™ RX1500
11. NETCONF
Figure 11.1. NETCONF menu
The NETCONF menu is accessible from the main menu under admin. The path to this menu is admin/
netconf.
Figure 11.2. NETCONF Sessions form
The path to the NETCONF Sessions form and the NETCONF State/Statistics form is admin/netconf.
enabled
Synopsis: boolean
Default: true
Provides the ability to configure NETCONF features on the device.
Listen IP
Synopsis: IPv4 address in dotted-decimal notation
Synopsis: IPv6 address in colon-separated hexadecimal notation
Default: 0.0.0.0
The IP Address the CLI will listen on for NETCONF requests (default 0.0.0.0).
Listen Port
Synopsis: unsigned short integer

RuggedCom RuggedBackbone RX1500 Specifications

General

Power Supply	Dual redundant, hot-swappable power supplies
Switching Capacity	Up to 128 Gbps
Operating Temperature Range	-40°C to +85°C
Mounting	DIN rail or panel mount
Certifications	IEEE 1613, IEC 61850-3, EN 50155, EN 50121-4
Power Input	24/48VDC or 110/220 VAC
Enclosure	Rugged metal
Type	Modular Layer 3 switch