23. WAN
ROX™ v2.2 User Guide 263 RuggedBackbone™ RX1500
Figure 23.38. DDS Parameters form
mode
Synopsis: string - one of the following keywords { 64k, 56k }
Default: 56k
DDS speed mode (kbps).
clock
Synopsis: string - one of the following keywords { master, normal }
Default: master
Serial clocking mode: master or normal.
• master : provide serial clock signal.
• normal : accept external clock signal.
23.4.1.3. Setting DDS PPP Connection Parameters
To set DDS PPP connection parameters, enter edit mode and navigate to /interface/wan{wan slot and
port}/dds/connection/ppp.
Figure 23.39. PPP form
nomagic
Synopsis: boolean
Default: false
Disables the Magic Number.
on-demand
This interface is up or down on demand of link fail over.
For more information on the On-demand function, see Section 41.3.4, “Link Backup On Demand”.
23.4.1.4. Setting DDS Frame Relay Parameters
You configure DDS frame relay parameters in two locations:
• /interface/wan{wan slot and port}/dds/connection/framerelay configures general frame relay
parameters
To Next Page
Loading...
Need help?
General
