RuggedCom RuggedBackbone RX1500 User Manual

22. Serial Protocols
ROX™ v2.2 User Guide 228 RuggedBackbone™ RX1500
Figure 22.8. Serial Protocols table
The Serial Protocols table displays the protocols configured. To display the Serial Interfaces table,
navigate to interface/serial/{line module}/protocols.
protocol
Synopsis: string - one of the following keywords { dnp, tcpmodbus, rawsocket }
22.2.2. Setting Rawsockets
Figure 22.9. Rawsocket Configuration form
The Rawsocket Configuration form is used to configure the Raw Socket settings for each port. Changes
are made immediately. To display the Rawsocket Configuration form, navigate to interface/serial/{line
module}/protocols/rawsocket/setrawsocket.
pack-char
Synopsis: string - the keyword { off }
Synopsis: integer
Default: off
The numeric value of the ASCII character which will force forwarding of
accumulated data to the network.
pack-timer
Synopsis: integer
Default: 1000
The delay from the last received character until when data is forwarded

RuggedCom RuggedBackbone RX1500 Specifications

General

Power Supply	Dual redundant, hot-swappable power supplies
Switching Capacity	Up to 128 Gbps
Operating Temperature Range	-40°C to +85°C
Mounting	DIN rail or panel mount
Certifications	IEEE 1613, IEC 61850-3, EN 50155, EN 50121-4
Power Input	24/48VDC or 110/220 VAC
Enclosure	Rugged metal
Type	Modular Layer 3 switch