RuggedCom RuggedBackbone RX1500 User Manual

15. DHCP Server
ROX™ v2.2 User Guide 149 RuggedBackbone™ RX1500
15.2.8.2.2. Client Configuration Options: Hosts
To set DHCP client configuration options at the host level, enter edit mode and navigate to /services/
dhcpserver/host{host id}/options.
Figure 15.13. Client Configuration form for Hosts
fixed-ip
Synopsis: IPv4 address in dotted-decimal notation
The IP address that the server assigns to the matching client
unknown-client
Synopsis: string - one of the following keywords { ignore, deny, allow }
The action to take for previously unregistered clients
shared-network
Synopsis: A string
Shared-network that this host belongs to
subnet
Synopsis: A string
Subnet that this host belongs to
host-groups
Synopsis: A string
Host groups that this host belongs to
15.2.8.2.3. Client Configuration Options: Host-groups
To set DHCP client configuration options at the host-group level, enter edit mode and navigate to /
services/dhcpserver/host-group{host-group id}/options.
Figure 15.14. Client Configuration form for Host-groups

RuggedCom RuggedBackbone RX1500 Specifications

General

Power Supply	Dual redundant, hot-swappable power supplies
Switching Capacity	Up to 128 Gbps
Operating Temperature Range	-40°C to +85°C
Mounting	DIN rail or panel mount
Certifications	IEEE 1613, IEC 61850-3, EN 50155, EN 50121-4
Power Input	24/48VDC or 110/220 VAC
Enclosure	Rugged metal
Type	Modular Layer 3 switch