RuggedCom RuggedBackbone RX1500 User Manual

34. Dynamic Routing
ROX™ v2.2 User Guide 416 RuggedBackbone™ RX1500
On Match Goto
Synopsis: unsigned integer
Go to this entry on match.
Route Map Match
AS Path Filter
Synopsis: A string conforming to: "[^\s]+"
Match the BGP AS path filter.
Match Address of Route
Prefix List
Synopsis: A string conforming to: "[^\s]+"
The prefix list name.
Match Next-Hop of Route
Prefix List
Synopsis: A string conforming to: "[^\s]+"
The prefix list name.
Route Source Match
Prefix List
Synopsis: A string conforming to: "[^\s]+"
The prefix list name.
Route Map Metric
Metric
Synopsis: unsigned integer
Match the route metric.
Peer Address
Synopsis: IPv4 address in dotted-decimal notation
Match the peer address.
Origin
Synopsis: string - one of the following keywords { incomplete, igp, egp }
Match the BGP origin code.
Aggregator
AS Number
Synopsis: unsigned integer
AS number.
IP Address
Synopsis: IPv4 address in dotted-decimal notation
IP address of aggregator.
Prepend
AS Number
Synopsis: unsigned integer

RuggedCom RuggedBackbone RX1500 Specifications

General

Power Supply	Dual redundant, hot-swappable power supplies
Switching Capacity	Up to 128 Gbps
Operating Temperature Range	-40°C to +85°C
Mounting	DIN rail or panel mount
Certifications	IEEE 1613, IEC 61850-3, EN 50155, EN 50121-4
Power Input	24/48VDC or 110/220 VAC
Enclosure	Rugged metal
Type	Modular Layer 3 switch