RuggedCom RuggedBackbone RX1500 User Manual

5. IP Network Interfaces
ROX™ v2.2 User Guide 88 RuggedBackbone™ RX1500
4. Click Commit.
5. Click Exit Transaction.
To set ProxyARP for a static or dynamic interface, follow the procedure below.
Procedure 5.9. Setting ProxyARP
1. Go into Edit Private mode.
2. Go to interface/eth/(port}. The Routable Ethernet Ports form appears.
3. In the ProxyARP field, click Enabled.
4. Click Commit.
5. Click Exit Transaction.

RuggedCom RuggedBackbone RX1500 Specifications

General

Power Supply	Dual redundant, hot-swappable power supplies
Switching Capacity	Up to 128 Gbps
Operating Temperature Range	-40°C to +85°C
Mounting	DIN rail or panel mount
Certifications	IEEE 1613, IEC 61850-3, EN 50155, EN 50121-4
Power Input	24/48VDC or 110/220 VAC
Enclosure	Rugged metal
Type	Modular Layer 3 switch