Parameters
List of Parameters
1-116
© Siemens AG 2009 All Rights Reserved
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 11/2009
Description: This parameter is identical to r0945.
Description: Displays the system runtime in milliseconds when the fault occurred.
Dependency: Refer to: r0945, r0947, r0949, r2109, r2130, r2133, r2136, p8400
Notice: The time comprises r2130 (days) and r0948 (milliseconds).
Note: The buffer parameters are cyclically updated in the background (refer to status signal in r2139).
The structure of the fault buffer and the assignment of the indices is shown in r0945.
When the parameter is read via PROFIdrive, the TimeDifference data type applies.
Description: Displays additional information about the fault that occurred (as integer number).
Dependency: Refer to: r0945, r0947, r0948, r2109, r2130, r2133, r2136
Note: The buffer parameters are cyclically updated in the background (refer to status signal in r2139).
The structure of the fault buffer and the assignment of the indices is shown in r0945.
Description: Lists parameters assigned to a fault.
Dependency: Refer to: r0946
Description: Number of fault situations that have occurred since the last reset.
Dependency: The fault buffer is deleted (cleared) by setting p0952 to 0.
Refer to: r0945, r0947, r0948, r0949, r2109, r2130, r2133, r2136
r0947[0...63] Fault number / Fault number
Access level: 2 Calculated: - Data type: Unsigned16
Unit: - Scaling: - Data set: -
r0948[0...63] Fault time received in milliseconds / t_fault recv ms
Access level: 3 Calculated: - Data type: Unsigned32
Unit: [ms] Scaling: - Data set: -
r0949[0...63] Fault value / Fault value
Access level: 3 Calculated: - Data type: Integer32
Unit: - Scaling: - Data set: -
r0951[0...65534] Fault number list / Flt num_list
Access level: 3 Calculated: - Data type: Unsigned16
Unit: - Scaling: - Data set: -
p0952 Fault cases, counter / Fault cases qty
Access level: 3 Calculated: - Data type: Unsigned16
Can be changed: U, T Scaling: - Data set: -
Min Max Factory setting
0 65535 0
To Next Page
Loading...
Need help?
General
