Function diagrams
Internal control/status words
2-486
© Siemens AG 2009 All Rights Reserved
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 11/2009
2.6 Internal control/status words
Function diagrams
2501 – Control word, sequence control 2-487
2503 – Status word, sequence control 2-488
2505 – Control word, setpoint channel 2-489
2510 – Status word 1 (r0052) 2-490
2511 – Status word 2 (r0053) 2-491
2512 – Control word 1 (r0054) 2-492
2513 – Control word 2 (r0055) 2-493
2520 – Control word, speed controller 2-494
2522 – Status word, speed controller 2-495
2526 – Status word, closed-loop control 2-496
2530 – Status word, current control 2-497
2534 – Status word, monitoring functions 1 2-498
2536 – Status word, monitoring functions 2 2-499
2537 – Status word, monitoring functions 3 2-500
2546 – Control word, faults/alarms 2-501
2548 – Status word, faults/alarms 1 and 2 2-502
2634 – Sequence control - Missing enable signals 2-503