Function diagrams
Setpoint channel
2-504
© Siemens AG 2009 All Rights Reserved
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 11/2009
2.7 Setpoint channel
Function diagrams
3010 – Fixed Frequencies, binary selection 2-505
3011 – Fixed Frequencies, direct selection 2-506
3020 – Motorized potentiometer 2-507
3030 – Main/supplementary setpoint, setpoint scaling, jogging 2-508
3040 – Direction limitation and direction reversal 2-509
3050 – Skip frequency bands and frequency limitations 2-510
3060 – Basic ramp-function generator 2-511
3070 – Extended ramp-function generator 2-512
3080 – Ramp-function generator selection, status word, tracking 2-513
To Next Page
Loading...
