SMC Networks LECSB2-T Series User Manual

5. PARAMETERS
5 - 13
No./symbol/
name
Setting
digit
Function
Initial
value
[unit]
Control
mode
P
S
T
PA02
*REG
Regenerative
option
_ _ x x
Regenerative option
Select the regenerative option.
Incorrect setting may cause the regenerative option to burn.
If a selected regenerative option is not for use with the driver, [AL. 37 Parameter
error] occurs.
00: Regenerative option is not used.
For the driver of 100 W, a regenerative resistor is not used.
For the driver of 200 W to750 W, the built-in regenerative resistor is used.
02: LEC-MR-RB-032
03: LEC-MR-RB-12
00h
_ x _ _
For manufacturer setting
0h
x _ _ _
0h

SMC Networks LECSB2-T Series Specifications

General

Brand	SMC Networks
Model	LECSB2-T Series
Category	DC Drives
Language	English