8. TROUBLESHOOTING
8 - 13
Excessive
regeneration warning
Excessive regeneration warning
Thermal overload warning 1
during operation
Thermal overload warning 2
during operation
Thermal overload warning 3
during operation
Thermal overload warning 4
during operation
Thermal overload warning 1
during a stop
Thermal overload warning 2
during a stop
Thermal overload warning 3
during a stop
Thermal overload warning 4
during a stop
Servo motor
overheat warning
Servo motor temperature
warning
Absolute position
counter warning
Multi-revolution counter travel
distance excess warning
Absolute position counter
warning
Absolute positioning counter
EEP-ROM writing frequency
warning
Encoder absolute positioning
counter warning
Parameter setting range error
warning
Time-out during ABS data
transfer
ABSM off during ABS data
transfer
SON off during ABS data
transfer
Servo forced stop
warning
SS1 forced stop warning 1
(safety observation function)
SS1 forced stop warning 2
(safety observation function)
Controller forced stop
warning
Controller forced stop input
warning
Cooling fan speed
reduction warning
Decreased cooling fan speed
warning
Servo-on signal on during main
circuit off
Bus voltage drop during low
speed operation
Ready-on signal on during main
circuit off
Converter unit forced stop
The other axis error
warning
The other axis error warning
Output watt excess
warning
Output watt excess warning
Instantaneous power failure
tough drive warning
Vibration tough drive warning
To Next Page
Loading...
Need help?
General