SMC Networks LECSB2-T Series User Manual

A - 8
DISPOSAL OF WASTE
Please dispose a driver, battery (primary battery) and other options according to your local laws and
regulations. Please display or notify the final product as necessary.
EEP-ROM life
The number of write times to the EEP-ROM, which stores parameter settings, etc., is limited to 100,000. If
the total number of the following operations exceeds 100,000, the driver may malfunction when the EEP-
ROM reaches the end of its useful life.
Write to the EEP-ROM due to parameter setting changes
Write to the EEP-ROM due to device changes
Origin setting in absolute position detection system
STO function of the driver
This driver complies with the safety level SIL 3 of the international standard IEC 61508: 2010 for functional
safety.
When using the STO function of the driver, refer to chapter 13.
Compliance with global standards
For the compliance with global standards, refer to appendix 4.
«About the manuals»
You must have this Instruction Manual and the following manuals to use this servo. Ensure to prepare
them to use the LECSB2-T
□
safely.
«Wiring»
Wires mentioned in this Instruction Manual are selected based on the ambient temperature of 40 °C.
«U.S. customary units»
U.S. customary units are not shown in this manual. Convert the values if necessary according to the
following table.
Quantity
SI (metric) unit
U.S. customary unit
Mass
1 [kg]
2.2046 [lb]
Length
1 [mm]
0.03937 [in]
Torque
1 [N•m]
141.6 [oz•in]
Moment of inertia
1 [(× 10
-4
kg•m
2
)]
5.4675 [oz•in
2
]
Load (thrust load/axial load)
1 [N]
0.2248 [lbf]
Temperature
N [°C] × 9/5 + 32
N [°F]

SMC Networks LECSB2-T Series Specifications

General

Brand	SMC Networks
Model	LECSB2-T Series
Category	DC Drives
Language	English