Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Secure the steering column -1- with a cable tie -2- to prevent
the inadvertent separation of the top and bottom section of the
steering column on removal.
Note
A rattling noise may be encountered whilst driving if the splines
are no longer in their original installation position.
– Screw out the bolts -arrows- and set down the steering column
in the footwell.
Note
To unplug the connector at the headlight range control unit, press
the catch -1-, turn the holder in -arrow direction- and unplug the
connector.
– Unplug the connector at the headlight range control unit -2-
and at the front parking aid warning buzzer -1-.
– Screw out the bolts -arrows-.
– Detach the control unit for front display and information control
panel -J523- .
– Unplug the connector -1-.
Note
Leave the connectors -Items 2- and -3- plugged in.
– Set down the control unit for front display and information con‐
trol panel in the footwell.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
3. Dash panel 237