Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Use a screwdriver to press the retaining spring in
-arrow direction- and take the cap -2- out of the heater duct.
– Screw out the bolts -1-.
– Screw out the bolts -arrows- on the right of the dash panel.
– Detach the felt from the dash panel at the outer corners in the
area of the dash panel insert.
– Screw out the bolts -arrows- on the left of the dash panel.
– Set down the dash panel with the upper side resting on a soft
surface.
WARNING
Heed the safety regulations for pyrotechnic components
⇒ page 94 .
– Unscrew the nuts -1- and -2-.
– Take the front passenger's airbag out of the dash panel.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
4. Central tube 243
To Next Page
Loading...
