Austro Engine E4 Series User Manual

E4 Series
Maintenance Manual
Standard
Procedures
E4.08.04
Rev.29
Page 101
70-Troubleshooting
01-Jul-2020
Troubleshooting Information
1. General
The table below lists the possible defects of the engine fasteners. If you have the trouble detailed in
the Trouble column, read across to the Possible Cause column. Then do the repair in the Repair
column.
Trouble
Possible Cause
Repair
Worn nuts and bolts
Under-torque (clamping area)
Replace the damaged parts.
Apply the correct torque.
Failure of a bolt or nut
(overstressed threaded areas)
Over-torque (threaded area)
Assembly wear or premature
failure
Uneven or additional loads are
applied to the assembly

Austro Engine E4 Series Specifications

General

Brand	Austro Engine
Model	E4 Series
Category	Engine
Language	English