Austro Engine E4 Series User Manual

E4 Series
Maintenance Manual
Reciprocating
Engine
Page 300
E4.08.04
Rev. 29
85-Maintenance Procedures
01-Jul-2020
Fig. 85 - 123 Front cylinder head cover installation
Fig. 85 - 124 Front cylinder head cover (Cylinder head version 2)
(h) Install the rear cylinder head cover
Detail Steps/Work Items
Key Items/References
(1)
Clean the sealing surface on the rear cylinder
head cover.
Refer to Fig. 85 - 125.
(2)
Apply engine sealant on the sealing surface.
Refer to the consumable list.
Refer to Fig. 85 - 125.
(3)
Install a new O-Ring on the cylinder head cover.
Refer to Fig. 85 - 126.
5x
Screw
O-Ring
Cylinder head cover
Screw
Cover

Austro Engine E4 Series Specifications

General

Brand	Austro Engine
Model	E4 Series
Category	Engine
Language	English