Austro Engine E4 Series - Troubleshooting Information; General

E4 Series
Maintenance Manual
Engine
Indicating
E4.08.04
Rev.29
Page 101
77 - Troubleshooting
01-Jul-2020
Troubleshooting Information
1. General
The table below lists the possible defects of the engine control system. If you have the trouble
detailed in the Trouble column, read across to the Possible Cause column. Then do the repair in
the Repair column.
Trouble
Possible Cause
Repair
One of the indicators does
not indicate correctly.
Sensor defective.
Identify the defect sensor
(rely on EECU sensor failure
detection) and do the
maintenance procedures.