Austro Engine E4 Series - Examine the Sensors; Actuators

E4 Series
Maintenance Manual
Power Plant
E4.08.04
Rev. 29
Page 207
71 -Maintenance Procedures
01-Jul-2020
B. Examine the Sensors / Actuators
Detail Steps/Work Items
Key Items/References
(1)
Examine the sensors for loosened, chafed, or
damaged connectors.
Use a repair kit if permitted,
differently, replace the engine harness.
Refer to Paragraph F.
(2)
Visually examine the interlocks that some
connectors have.
Replace the connector housing if
permitted, differently, replace the
engine harness.
Refer to Paragraph F.
(3)
Replace the damaged sensors.