Austro Engine E4 Series - (E) Remove the Front Cylinder Head Cover

E4 Series
Maintenance Manual
Reciprocating
Engine
Page 282
E4.08.04
Rev. 29
85-Maintenance Procedures
01-Jul-2020
(e) Remove the front cylinder head cover
Detail Steps/Work Items
Key Items/References
(1)
Remove the 5 screws from the cylinder head
cover.
Refer to Fig. 85 - 102.
(2)
Remove the front cylinder head cover and the O-
Ring.
Fig. 85 - 102 Front cylinder head cover
5x
Screw
O-Ring
Cylinder head cover