Austro Engine E4 Series - 12-10-00 Engine Oil Servicing

E4 Series
Maintenance Manual
Servicing
E4.08.04
Rev.29
Page 201
12 - Maintenance Procedures
01-Jul-2020
12-00-00 Servicing
This chapter contains information on the engine servicing.
12-10-00 Engine Oil Servicing
A. Complete a check of the Oil level
Detail Steps/Work Items
Key Items/References
(1)
Remove the oil dipstick.
Refer to Fig. 12 - 1.
(2)
Make sure the engine is at the optimum run.
The oil level should be in the
middle of the min/max.
(3)
If necessary, fill the correct quantity of engine
oil.
Refer to requirements specified in
Chapter 79.
(4)
Install and close the oil dipstick.
Refer to Fig. 12 - 1.
Fig. 12 - 1 Oil level check
Fig. 12 - 2
Oil dipstick