Austro Engine E4 Series - (F) Install the Chain Tensioner

E4 Series
Maintenance Manual
Reciprocating
Engine
Page 298
E4.08.04
Rev. 29
85-Maintenance Procedures
01-Jul-2020
(f) Install the chain tensioner
Detail Steps/Work Items
Key Items/References
(1)
Tighten the chain tensioner with the sealing ring
into the cylinder head.
Torque 80 Nm.
Refer to Fig. 85 - 121.
(2)
Turn the engine and make sure that all parts
move freely.
Fig. 85 - 121 Chain tensioner installation
Sealing ring
Chain tensioner