Austro Engine E4 Series - Replace the Two-Mass Flywheel

E4 Series
Maintenance Manual
Reciprocating
Engine
E4.08.04
Rev. 29
Page 249
85-Maintenance Procedures
01-Jul-2020
Fig. 85 - 69 Degree measuring gauge
E. Replace the Two-Mass Flywheel
Detail Steps/Work Items
Key Items/References
(1)
If you do not find any damage during the
visual and mechanical inspection, the two-
mass flywheel is serviceable on an E4 engine.
(2)
If you find damage during the visual and
mechanical inspection, replace the two-mass
flywheel.
A repair of the two-mass flywheel is
not possible.