Austro Engine E4 Series - Assembly the Two-Mass Flywheel; Pack and Ship the Two-Mass Flywheel

E4 Series
Maintenance Manual
Reciprocating
Engine
E4.08.04
Rev. 29
Page 253
85-Maintenance Procedures
01-Jul-2020
H. Assembly the Two-Mass Flywheel
Detail Steps/Work Items
Key Items/References
(1)
Install the two-mass flywheel.
Refer to Paragraph 5.B.
I. Pack and Ship the Two-Mass Flywheel
Detail Steps/Work Items
Key Items/References
(1)
Put the overhauled two-mass flywheel in a
bubble wrap.
Refer to Fig. 85 - 74.
(2)
Attach a label which contains:
- Part number
- Name
- Serial Number S/N
- Revision status.
Refer to Fig. 85 - 73.
Fig. 85 - 74 Two-Mass Flywheel packing
Fig. 85 - 73 Two-Mass Flywheel label