Dell N1100-ON

Security Commands 1002
Command Mode
Captive Portal Instance mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-cp 2)#protocol http
redirect
Use the redirect command to enable the redirect mode for a captive portal
configuration. Use the “no” form of this command to disable redirect mode.
Syntax
redirect
no redirect
Default Configuration
Redirect mode is disabled by default.
Command Mode
Captive Portal Instance mode.
User Guidelines
Enabling redirect mode will configure the redirect-url with an empty URL.
Example
console(config-cp 2)#redirect
redirect-url
Use the redirect-url command to configure the redirect URL for a captive
portal configuration.