Layer 3 Routing Commands 1527
Example
console (config)#ipv6 nd nud max-multicast-solicits 5
ipv6 nd nud max-unicast-solicits
Configures the maximum number of unicast neighbor solicitations sent
during neighbor resolution or during NUD (neighbor unreachability
detection). Use the no form of the command to reset the value to the default.
Syntax
ipv6 nd nud max-unicast-solicits num-solicits
no ipv6 nd nud max-unicast-solicits
num-solicits—The maximum number of unicast Neighbor Solicitations sent
during neighbor resolution or during NUD (neighbor unreachability
detection). The value ranges from 3 to 10. The default value is 3.
Default Configuration
The default number of solicits is 3.
Command Mode
Global Configuration
User Guidelines
Increase this value when neighbors are not being discovered or large numbers
of neighbors are present.
Command History
Introduced in version 6.2.0.1 firmware.
Example
console (config)#ipv6 nd nud max-unicast-solicits 5
To Next Page
Loading...
