Dell N1100-ON

Switch Management Commands 2228
1 PHY 34
show tech-support
Use the show tech-support command to display system and configuration
information for use in debugging or contacting technical support. The output
of the show tech-support command combines the output of the following
commands:
• show interfaces transceiver
• show power inline
• show switch stack-port counters
• show nsf
• show slot
• show interfaces advertise
• show interfaces advanced firmware
• show lldp remote-device all
• show interfaces counters errors
• show fiber-ports optical-transceiver
• show process cpu
• show iscsi sessions
• show ethernet cfm errors (N4000 series only)
• show power inline firmware-version
• show version
• show interfaces transceiver properties
Syntax
show tech-support [ bgp | bgp-ipv6 | ospf | ospfv3 | bfd ] [file | usb]
• bgp — Show detailed information specific to BGP.
• bgp-ipv6 — Show detailed information specific to BGP IPv6.
• ospf — Show detailed information specific to OSPF.
• ospfv3 — Show detailed information specific to OSPFv3.
• bfd — Show detailed information specific to BFD.
• file — Write the output to a file in the local flash instead of the console.