Dell N1100-ON

Layer 3 Routing Commands 1544
Example
console#show ipv6 mld groups ff1e::5
Interface..................................... vlan 6
Group Address................................ FF1E::5
Last Reporter................... FE80::200:FF:FE00:22
Up Time (hh:mm:ss).......................... 00:03:43
Expiry Time (hh:mm:ss)......................... -----
Filter Mode..........................................Include
Version1 Host Timer............................ -----
Group compat mode.............................. v2
Source Address ExpiryTime
----------------- -----------
4001::6 00:03:15
4001::7 00:03:15
4001::8 00:03:15
console#show ipv6 mld groups vlan 6
Group Address................................ FF1E::1
Interface..................................... vlan 6
Up Time (hh:mm:ss).......................... 00:04:23
Expiry Time (hh:mm:ss)........................ ------
Group Address................................ FF1E::2
Interface..................................... vlan 6
Up Time (hh:mm:ss).......................... 00:04:23
Expiry Time (hh:mm:ss)........................ ------
Group Address................................ FF1E::3
Interface..................................... vlan 6
Up Time (hh:mm:ss).......................... 00:04:23
Expiry Time (hh:mm:ss)........................ ------
Group Address................................ FF1E::4
Interface..................................... vlan 6
Up Time (hh:mm:ss).......................... 00:04:23
Expiry Time (hh:mm:ss)........................ ------
show ipv6 mld interface
The show ipv6 mld interface command is used to display MLD related
information for an interface.
Expiry Time Time left in seconds before the entry is removed.