Dell N1100-ON

Switch Management Commands 1949
Syntax
clear ip address-conflict-detect [vrf vrf-name]
• vrf-name—The name of the VRF instance on which the command
operates. If no VRF parameter is given, counters for the default (global)
router instance is cleared.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode
User Guidelines
The VRF identified in the parameter must have been previously created or an
error is returned. Virtual Router Configuration mode is only available on the
Dell EMC Networking N3000/N3100-ON/N4000 switches.
Example
console#clear ip address-conflict-detect
interface out-of-band
Use the interface out-of-band command to enter into OOB interface
configuration mode.
Syntax
interface out-of-band
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration