Dell N1100-ON

Layer 2 Switching Commands 829
vlan protocol group name
This is a new command for assigning a group name to vlan protocol group id .
Syntax
vlan protocol group name group-id groupName
no vlan protocol group name group-id
• groupid—The protocol-based VLAN group ID, which is automatically
generated when you create a protocol-based VLAN group with the vlan
protocol group command. To see the group ID associated with the name
of a protocol group, use the show port protocol all command
• groupName—The group name you want to add. The group name can be
up to 16 characters length. It can be any valid alpha numeric characters.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config)# vlan protocol group name 1 usergroup
vlan protocol group remove
Use the vlan protocol group remove command in Global Configuration
mode to remove the protocol-based VLAN group identified by groupid.
Syntax
vlan protocol group remove group-id